BetaWA — Battery Pack Optimizer

Battery Cell Matching by Capacity

Matching lithium battery cells by measured capacity is an important step when building battery packs from tested second-life cells or modules. Cells that appear similar may have different remaining capacities after years of use.

What Is Battery Cell Matching?

Battery cell matching is the process of selecting and arranging tested cells according to measured characteristics. Capacity matching focuses on the amount of charge each cell can deliver under defined test conditions, usually expressed in ampere-hours (Ah).

For meaningful comparisons, capacities should be measured using consistent test procedures, including suitable charge and discharge limits, current, and temperature.

Why Capacity Matching Matters

In a battery pack, parallel-connected cells form groups, and these groups may be connected in series. The usable capacity of a series-connected pack is constrained by the group that reaches its operating limit first.

If one series group has substantially less usable capacity than the others, the battery management system may need to stop discharge earlier, leaving some capacity in the stronger groups unused.

Matching the total capacities of parallel groups can help reduce this imbalance.

Understanding Series and Parallel Groups

A configuration such as 14S4P contains 14 groups connected in series, with four cells connected in parallel within each group.

The total number of cells is:

14 × 4 = 56 cells

The nominal pack voltage depends on cell chemistry and the number of series groups. The capacity of a parallel group is approximately the sum of the usable capacities of its constituent cells, assuming compatible cells and appropriate operating conditions.

How BetaWA Optimizes Cell Grouping

BetaWA uses measured cell capacities to search for combinations of parallel groups with similar total capacities. Users provide an inventory containing cell identifiers and measured capacity values, then select a battery configuration and requested tolerance.

The optimizer produces an assembly map showing the proposed grouping of available cells. It also reports the resulting capacity spread and whether the calculated result satisfies the selected tolerance.

A completed assembly is not necessarily a successfully balanced assembly: users should always review the reported capacity spread and warnings.

Practical Example: Building a 14S4P Pack

Suppose a battery rebuilder has 56 tested lithium cells with different remaining capacities and wants to assemble a 14S4P battery pack.

Rather than grouping cells arbitrarily, BetaWA searches for 14 parallel groups of four cells each, aiming to make their combined capacities as similar as possible.

For example, cells with capacities of 2.4 Ah, 2.5 Ah, 2.6 Ah, and 2.7 Ah would have a combined nominal measured capacity of approximately 10.2 Ah when placed in a compatible parallel group.

This is an illustrative calculation, not a guaranteed optimization result. Actual grouping depends on the entire inventory and the selected configuration.

Capacity Matching Is Not a Complete Safety Assessment

Important: Capacity matching alone does not establish that cells are safe or suitable for assembly.

Before building a battery pack, evaluate cell chemistry, voltage compatibility, internal resistance, self-discharge, physical condition, temperature behavior, protection requirements, and the battery management system (BMS).

Parallel connection of cells at different voltages can cause dangerous equalization currents. Battery assembly should be performed only by people with appropriate knowledge, equipment, and safety procedures.

Try the BetaWA Battery Pack Optimizer

If you have measured capacity data for your cells or modules, BetaWA can help explore suitable series-parallel groupings and generate an assembly map.

Try BetaWA Optimizer

Related article: See a real optimization example: 56 cells in a 14S4P battery

Related article: How to reuse Nissan Leaf battery cells for 24V and 48V battery packs